Set working offset.
Offset is calculated so that current position becomes desired position specified with axis words.
G92 is a G-code used to set the current position of the machine as a new reference point. It allows you to change the zero point of the machine's coordinate system to any location. It is commonly used to make a temporary offset or to adjust the workpiece to a new position without physically moving it.
The G92 command is usually followed by one or more axis words, such as X, Y, and Z, to specify the new position for the machine's zero point. For example, G92 X10 Y5 Z0 would set the current position of the machine as the new zero point for the X, Y, and Z axes.
G92 <X..W>
Set working position.
G92 H E
Set working position.
Set X working position to 100 and Y working position to -30.
G92 X100 Y-30
Set working position for axis 2 (Z) to -20.
G92 H2 E-20