Table of Contents

Order of execution
- - Modal state
  - Settings
  - Tools
  - Inputs & Outputs
  - Control
  - Offsets
  - Comments
  - Motion
  - Delay

Order of execution

Modal state

Units: G20, G21, G70, G71
Plane: G17, G18, G19
Distance Mode: G90, G90.1, G90.2, G91, G91.1, G91.2, M82, M83
Lathe Mode: G07, G08
Cycle Return: G98, G99
Polar Mode: G15, G16
Feed Mode & Speed: G93, G94, G95, F
Spindle Mode & Speed: G96, G97, S

Settings

Settings: G10
Set Home: G28.1, G30.1

Tools

ToolSelect: T
ToolChange: M6, M61

Inputs & Outputs

Spindle & Coolant: M3, M4, M5, M7, M17, M8, M18, M9
IO: M10, M11, M59, M62, M63, M64, M65, M66

Control

Overrides: M48, M49, M50, M51, M53, M54, M55, M56, M57
Pause: M0, M1
Sync & SetPosition: G09
Blend Mode: G61, G61.1, G64

Offsets

Tool: G43, G43.1, G44, G44.1, G49, G40, G41, G41.1, G42, G42.1
Work: G92, G92.1
Axis: G52, G52.1, G50, G51, G68, G69
CoordinateSystem: G54, G54.1, G55, G56, G57, G58, G59, G59.1, G59.2, G59.3

Comments

clear, print, status, msg, clipboard, mdi,
log, logcreate, logopen, logclose,
paramsclear, txt,
pointsclear, pointssave, pointsload, pointsshapes, point, pointpos,
py, pythr,
name, desc, dlgname, dlg, dlgshow,
arrclr, array, arrchr, crc16, crc32,
sw_reset, sw_print,
block_begin, block_end,
usb, expr,
color

Motion

Cancel Motion: G80
Linear Feed Move: G00, G01
Arc Move: G02, G03
Curves: G05, G05.1, G05.2, G05.3
Home: G28, G30
Probe: G31, G38.1, G38.2, G38.3, G38.4, G38.5
Sync: G32, G33, G33.1
Shapes: G06, G06.1, G06.2, G06.3
Cycles: G75, G76, G77, G78, G79, G12, G13, G72, G72.1, G72.2, G81, G82, G83, G84, G85, G86, G87, G88, G89, G73, G74

Delay

Dwell: G04