User Tools

Site Tools


Sidebar

Home



PlanetCNC TNG


Introduction
Overview
Installation


User Interface


Main Window

File Menu

View Menu

Program Menu

Machine Menu

  Emergency Stop
  Start
  Stop
  Pause
  Start Options
  Overrides
   Speed Override
   Spindle Override
   Pause Enable
   Pause Optional
   Single Step
  Mist
  Flood
  Spindle
  Output
  ExtOut
  Motor, Limits, Probe
   Motors Enable
   Soft Limits Enable
   Hard Limits Enable
   Probe Trigger
  Tools
   Current
   Change
   Select
   Edit Tool Table
   Measure Current Tool
   Measure All Tools
  Move
   To Zero
   To...
   Axis To Zero
   To G28, G30
   To Selected Line
   To Mark
   Program Bounds
   Position To Camera
   Camera To Position
   Camera To Sel. Line XY
  Machine Position
   To Zero
   To...
   Axis To Zero
   Unwind
   As G28, G30
   Reset THC
  Work Position
   To Zero
   To...
   Axis To Zero
   From Program
   Measure Height
   Offset To Zero
   Offset To...
   Offset Axis To Zero
   Selected Line
   Camera
  Coordinate System
   Current
   Select
   To Zero
   To...
   Axis To Zero
   Measure Height
   Offset To Zero
   Offset To...
   Offset Axis To Zero
   Edit Coordinate Systems
  Tool Offset
   Enabled
   To Zero
   To...
   Axis To Zero
   Measure Length
   From Tool Table
  Home
  Cycle
   Mill Facing
   Mill Profile
   Mill Pocket
   Mill Circular Pocket
   Drill
   Drill Tap
   Turn Facing
   Turn Roughing
   Turn Repeating
   Turn Finishing
   Turn Grooving
   Turn Threading
  Measure
   Probe Calibration
   Edge Find
   Edge Position
   Edge Angle
   Inside Corner
   Outside Corner
   Hole
   Protrusion
   Slot
   Tab
   Surface Height
   Surface Angle
   Surface
   Gantry Square
  Points
   Count
   Load
   Save
   Save STL
   Save DXF
   To Output
   Clear
   Add From Position
   Add From Camera
  Camera
   Show
   Mark
   Read
   Calibrate Scale
   Set Offset
  User Commands
  Controller
   Reconnect
   Reset
   Firmware Update
   Advanced

Help Menu


Settings



Parameters


tng:machine_menu:machine_menu-tools_edit_tool_table

Tools - Edit Tool Table

Tool table is a table that holds and organizes the cutting tools used in CNC machines. It allows for quick and easy tool changes during machining processes. The table includes information such as the type of tool, tool number, and tool length, among other important details.

Tool table is organized into several tabs.

General - Offset - Tool Change - Custom - Parameters - Speed & Feed

Add
This button creates and adds tool to tool table.

Update
This button updates any configuration changes of selected tool from tool table.

Delete
This button deletes selected tool from tool table.

Import…
Import button imports tool table that was saved previously as file.

Export…
Export button exports tool table file.

OK
This button confirms changes and closes Edit Tool Table dialog.

PLEASE NOTE: To create and add new tool to tool table, user needs to use Add button.
If configuration changes were made to existing tools from tool table, user needs to use Update button.

Cancel
This button cancels changes and closes Edit Tool Table dialog.

Creating a new tool in the tool table

Click 'Machine/Tools/Edit Tool Table'.

Under Tool No.: insert number for new tool.

Insert Diameter value and its name.

Insert tool offset (usually only in Z axis).

Then click Add. Tool will appear in the tool list.

To change parameters of already created tool select/highlight the tool from tool list and change tools parameters. Then click Update.

tng/machine_menu/machine_menu-tools_edit_tool_table.txt · Last modified: 2023/02/13 18:30 by 127.0.0.1

Page Tools