User Tools

Site Tools


Table of Contents

Motor Drivers

Group of settings intended for integrated motor drivers of Mk3DRV motion controller.

Please note that these settings are enabled only when Mk3DRV controller is connected and selected as Primary controller under Settings/Connection


User can choose between 1/1 step mode (full step) and 1/32 step mode (32 micro steps).


User can set motor drivers current value using “+” or “-” buttons or typing current value directly into “Current” window. Minimal recommended value is 0.5A, maximal value is 2.5A.

tng/settings/settings-motor_drivers.txt · Last modified: 2023/10/18 08:50 by planetcnc

Page Tools