User Tools

Site Tools


Sidebar

Home



G-Code


About

  Order of execution
  Parameters

G-Codes

  G00 - Rapid Move
  G01 - Linear Feed Move
  G02 - Clockwise Arc Feed Move
  G03 - Counter Clockwise Arc Feed Move

  G04 - Dwell

  G05 - Cubic Spline
  G05.1 - Quadratic Spline
  G05.2 - NURBS Block
  G05.3 - NURBS Block End

  G06 - Shapes Exec
  G06.1 - Shapes Clear
  G06.2 - Shapes Load
  G06.3 - Shapes Process

  G07 - Lathe Mode - Diameter
  G08 - Lathe Mode - Radius

  G09 - Stop, Sync & Set Position

  G10 - Settings

  G12 - Mill: Circular Pocket CW
  G13 - Mill: Circular Pocket CCW

  G15 - Polar Coordinate Cancel
  G16 - Polar Coordinate Enable

  G17 - XY Plane
  G18 - ZX Plane
  G19 - YZ Plane

  G20 - Inch Units
  G21 - Millimeter Units

  G28 - Go To Home
  G28.1 - Set Home
  G30 - Go To Home
  G30.1 - Set Home

  G32 - Spindle Synch Motion
  G33 - Spindle Synch Motion
  G33.1 - Spindle Synch Motion With Return

  G31 - Probe
  G38.1 - Probe
  G38.2 - Probe
  G38.3 - Probe
  G38.4 - Probe
  G38.5 - Probe

  G40 - Tool Compensation Cancel
  G41 - Tool Compensation Left
  G41.1 - Tool Compensation Dynamic Left
  G42 - Tool Compensation Right
  G42.1 - Tool Compensation Dynamic Right

  G43 - Tool Offset+ Enable
  G43.1 - Tool Offset+ Enable
  G44 - Tool Offset- Enable
  G44.1 - Tool Offset- Enable
  G49 - Tool Offset Cancel

  G50 - Axes Scale Cancel
  G51 - Axes Scale Enable

  G52 - Axes Offset
  G52.1 - Axes Offset Cancel

  G53 - Machine Coordinate System

  G54 - Coordinate System 1
  G54.1 - Coordinate System P
  G55 - Coordinate System 2
  G56 - Coordinate System 3
  G57 - Coordinate System 4
  G58 - Coordinate System 5
  G59 - Coordinate System 6 (or P)
  G59.1 - Coordinate System 7
  G59.2 - Coordinate System 8
  G59.3 - Coordinate System 9

  G61 - Blend Cancel
  G64 - Blend Enable

  G65 - Call Macro

  G68 - Axes Rotate Enable
  G69 - Axes Rotate Cancel

  G70 - Inch Units
  G71 - Millimeter Units

  G72 - Mill: Facing
  G72.1 - Mill: Profile
  G72.2 - Mill: Pocket

  G73 - Drill: Drill, Speed Peck, Dwell
  G74 - Tap: Left
  G75 - Turn: Pattern Repeating
  G76 - Turn: Threading
  G77 - Turn: Roughing X
  G78 - Turn: Roughing Z
  G79 - Turn: Grooving

  G80 - Cancel Motion

  G81 - Drill: Drill
  G82 - Drill: Drill, Dwell
  G83 - Drill: Drill, Peck, Dwell
  G84 - Tap: Right
  G85 - Bore: Feed In, Feed Out
  G86 - Bore: Feed In, Spindle Stop, Rapid Out, Spindle Start
  G87 - Bore: Feed In, Spindle Reverse, Rapid Out, Spindle Reverse
  G88 - Bore: Feed In, Spindle Stop, Feed Out, Spindle Start
  G89 - Bore: Feed In, Spindle Reverse, Feed Out, Spindle Reverse

  G90 - Distance Mode - Absolute
  G90.1 - Distance Mode - IJK Absolute
  G90.2 - Distance Mode - ABC Absolute
  G91 - Distance Mode – Incremental
  G91.1 - Distance Mode - IJK Incremental
  G91.2 - Distance Mode - ABC Incremental

  G92 - Working Offset
  G92.1 - Working Offset Set

  G93 - Feed Mode - Inverse Time
  G94 - Feed Mode - Units per Minute
  G95 - Feed Mode - Units per Revolution

  G96 - Spindle Mode - CSS
  G97 - Spindle Mode - RPM

  G98 - Cycle Return - Initial Z Point
  G99 - Cycle Return - R Point

M-Codes

Other Codes

O-Words

Comments

Functions

Operators

Macros

gcode:gcodes:gcode-g65

G65 - Call Macro

Calls macro/subprogram.

Syntax

G65 P <L> 

Parameters

P Subprogram name.
L Number of repeats. (optional)

Examples

G65 P1000
G65 P2000 L3
M2
 
O1000
(print,This is subprogram O1000)
M99
 
O2000
(print,This is subprogram O2000)
M99

See also

gcode/gcodes/gcode-g65.txt · Last modified: 2023/05/19 23:43 by andrej

Page Tools