User Tools

Site Tools


tng:settings:settings-user_interface_utilities

User Interface - Utilities

Colors

Find Match button

Based on selected Main color, color generator will generate and adjust suitable color shade for Utilities panel items.


Background

Background color of Utilities segment. This color will be used for all Utilities panels. This color can be set automatically using color generator or using color palette.

Example:Background color of Output panel set to rose color


Text

Color of Utilities text. This color will be used for all Utilities panels. This color can be set automatically using color generator or using color palette.

Example:Text color set to white color


Button

Utilities button colors. This color will be used for all Utilities panels. These colors can be set automatically using color generator or using color palette.

Example:Button color set to yellow color

Panels

Edit: Embed

When enabled, Edit panel will be permanently embedded under Utilities panel.


Camera: Embed

When enabled, Camera panel will be permanently embedded under Utilities panel.


Log: Embed

When enabled, Log panel will be permanently embedded under Utilities panel.


Example:All utilities panels permanently embedded. User can use tabs in order to select desired panel

Counters

This handy tool senses, recognises and counts the source of the input triggering. 

Limit: Enable

Enables scanning of Limit inputs of controller. Any input activation(voluntary or involuntary(e.g. EM interference)) will be recorded and printed to the Output window of utilities panel.


Input: Enable

Enables scanning of Input inputs of controller. Any input activation(voluntary or involuntary(e.g. EM interference)) will be recorded and printed to the Output window of utilities panel.


Jog: Enable

Enables scanning of Jog inputs of controller. Any input activation(voluntary or involuntary(e.g. EM interference)) will be recorded and printed to the Output window of utilities panel.


Error&Stop: Enable

Enables scanning of Error and Estop inputs of controller. Any input activation(voluntary or involuntary(e.g. EM interference)) will be recorded and printed to the Output window of utilities panel.


Timer: Enable

Enables time and utilisation measurement processes and selective processor threads.

Example:Timing and utilization values displayed at the status bar


Example:Input pin activation count for Input, Jog and Limit pins of controller. Number of triggering events is also displayed in the output panel

Audio

Allows user to select audio input and output device.

Audio In

Audio input device can be selected from drop down menu. All connected and available devices are displayed and up for selection.

Example:Devices ready for selection

Audio Out

Audio input device can be selected from drop down menu. All connected and available devices are displayed and up for selection.

Example:Devices ready for selection

Midi

Allows user to select MIDI input and output device.

Midi In

MIDI input device can be selected from drop down menu. All connected and available devices are displayed and up for selection.

Debug

By enabling the Debug option, user can receive immediate feedback from a device in the output window. This is a great way to see if TNG and device communicate and if everything is ok up to this point. It also gives user a in-depth look what kind of MIDI messaged are buttons and knobs of MIDI device sending.


Midi Out

MIDI output device can be selected from drop down menu. All connected and available devices are displayed and up for selection.


Example:

tng/settings/settings-user_interface_utilities.txt · Last modified: 2023/10/10 14:24 by planetcnc

Page Tools